• Home Cracked Fender?

Cracked Fender?

Cracked Bumper? Fix It the Smart Way.

A cracked fender is among the very most typical car body repairs carried out by bright (Small to Medium Area Repair Techniques) repair operatives. Fenders are made to handle like being hit by a shopping trolley, low speed scraping collisions and car park barriers along with other modest impacts low impact collisions. Frequently this sort of accident leads to scores, scuffs and scrapes which a mobile car body repair technician with some car body filler, primer, paint and lacquer can repairs quickly and easily. Occasionally however, a fracture will appear and divide the bumper and this has to be dealt with differently.

If your cracked bumper is not repaired or the repair is carried out with normal filler, the bumper’s structural integrity is endangered. It is critical that the bumper fracture rejoined and is treated with a tough yet flexible resin. A special technique is used to execute this which ought to be carried out every time.

Generally the crack does not appear intense, it frequently has the appearance of a hairline crack and it is appealing treat that as fixed and to run a small filler. The end result of this is that the next time the bumper is put under any pressure whatsoever, the crack will reappear and often widen. The crack must be widened, effectively worsening the damage Alloy Wheel Refurb Enfield so that there’s enough of an opening for the resin to fit in. A hole is drilled at each end of the crack, half on and half off the very end. This permanently ceases the crack from jogging again. A v-shaped groove has to be made down the crack’s middle, wide enough without going off the border of the crack, to make a hole.

A mix of hardener and resin, specifically invented for bumper repairs such as this, is subsequently injected into every one of the holes which have been drilled. The purchase needed to avoid the resin going right through is provided by the net backing. The aim here will be to effectively “stitch” the repair together.

After applying the resin, a body filler spreader (or ideally specialist contouring picture) is used to smooth the repair on the top side of the fender to minimise the sanding which will be required afterwards. Care must be taken if sanded, as the bumper resin can melt down. Following the resin has completely hardened the bumper is structurally sound again and will be sanded, filled, primed, painted and lacquered as regular. Result – a perfect bumper repair